Sfera Gradual Smoothing Anti Frizz Brazilian Hair Smoothing 3 Itens - Nazca

SFERA PROFESSIONAL GRADATIVE STRIPING provides hair alignment through a combination of protein and amino acid, making them progressively smoother.

Its exclusive formula has Argan Oil and Keratin Technology, an exclusive technology that helps to replenish hair keratin. Rich in essential amino acids, this technology protects the strands during the process, helping to repair the strands.

PROGRESSIVE EFFECT
With each application of SFERA PROFESSIONAL GRADATIVE STRIPING, the progressive effect is intensified, leaving hair smoother and with controlled volume. The smooth effect and its durability (temporary, on average 2 months) may vary according to the type of hair. The application can be made to all hair types, including chemically treated hair (colored, bleached, straightened or relaxed), as long as it is in healthy condition. In case of doubt, consult a professional hairdresser.

ATTENTION
- It is essential to fully read the following information before starting the process of
- Progressive Brush. Strictly follow usage information for best results.
*Expected result may differ depending on initial hair condition.
** As long as the hair is in healthy condition to receive the thermal process of the Sfera Professional Progressive Brush. A wick test is essential before using the product. Minimum time of 30 days after the smoothing or relaxation process.

IMPORTANT INFORMATIONS
- Before use, it is essential to do the touch test and the wick test;
- Strictly follow the instructions for use of the products contained in the explanatory leaflet;
- In case of doubt, consult a professional hairdresser;
- The expected result may be different depending on the initial hair condition (see table above);
- Sfera Professional Gradual Defrisagem can be applied to natural or chemically treated hair (colored, bleached, straightened or relaxed) as long as it is in healthy condition;
- Sfera Professional Gradual Defrisagem can be applied to straightened or relaxed hair with any chemical base; however, if you want to use a straightening or relaxing product on hair treated with Sfera Professional Gradual Defrisagem, it is recommended to perform the lock test;
- In colored hair, the hair color may change to up to 2 shades lighter;
- In hair with light shades (above 6) it is essential to carry out the streak test to make sure that the hair is in healthy condition. In this case, there may also be a change in hair color;
- In the case of hair dyed in shades from black (1.0) to dark brown (3.0), first carry out the Sfera Professional Gradual De-Fraising process, as there will be an opening of existing shades in the coloration, and then tone the hair with the color of your preference. Do not use hydrogen peroxide above 10 volumes and to use ammonium coloration, wait 30 days;
- The Professional Sfera Brown Matting Hair Reconstructor is not a color, and therefore does not cover the white hairs, it only temporarily neutralizes the unwanted reflections that may arise after the Gradual De-frizz process;
- Depending on the natural color of the hair and the chemical coloring and bleaching processes carried out on them, the threads may be tinted in different shades;
- We recommend the use of Sfera Professional Unyellow Hair Reconstructor at most twice a week, so that no unwanted effect occurs on the hair.
- In hair with white strands, the tinting effect will occur for the golden tone, thus not achieving the desired result.
For frizzy or resistant hair, we recommend that you first straighten or relax with the Sfera Professional product suitable for your hair, and after 30 days use the Sfera Professional Gradual Defrisagem. For your safety, do the wick test before using the product;
- Sfera Professional Progressive Brush can be reapplied after 30 days;
- We recommend using a flat iron at 200°C for better product performance.

DIRECTIONS FOR USE:
ATTENTION: We do not recommend the use for hair that is fragile, dry or opaque (without shine).

STEP 1 - TOUCH TEST
The touch test is a procedure that must be done and repeated with each application:
1. Wash a small area on your forearm or behind your ear.
2. Apply a small amount of Volume Reducer on your forearm or behind your ear and let it work for 10 minutes.
3. Wash the application site with plenty of water and wait 24 hours.
4. After 24 hours check the application site and if there is skin irritation, itching, burning in the area or in nearby regions, do not use the product.
Remember, any product can cause an allergic reaction, so always touch test before using.

STEP 2 - MECHA TEST
5. Separate a small lock in the region of the top of the head and apply the Volume Reducer with the aid of a non-metallic handle brush, keeping a distance of 1.0 cm from the root.
6. Let the product act for 15 minutes. Then, align the strands of the lock with the help of a comb in the same direction as the start of the strands.
7. Dry the strand performing the brushing process and finish using a flat iron heated to 200°C (recommended temperature), flat ironing the strand 6 to 10 times.
8. Allow the strands to cool for approximately 15 minutes.
9. Rinse thoroughly with water until all the product is removed.

ATTENTION: If after the lock test your hair became brittle, dry or without elasticity, it is a sign that the hair is not in a healthy condition for using the product. We recommend using the SFERA PROFESSIONAL RECONSTRUCTION AND FORCE line. After 30 days, perform a new wick test.

STEP 3 - PREPARATION FOR THE PROGRESSIVE BRUSH PROCESS
10. Set aside all necessary material.

NECESSARY MATERIALS
• Plastic container
• Disposable gloves (already included with the product)
• Non-metallic handle brush
• Comb
• Towels
• Non-metallic cleats
• Hairdryer
• Modeling brush
• Flat Iron (Plank)

STEP 4 - WIRES SANITATION
11. Apply Deep Cleansing Shampoo (Step 1) to wet hair, massage into a lather and rinse. Repeat the operation and rinse your hair well.
12. Remove excess water from hair with a towel.
13. Dry 100% of the hair with the aid of a hair dryer.

STEP 5 - APPLICATION OF THE VOLUME REDUCER
14. Comb the hair that is still dry, leaving it completely untangled.
15. Add the entire contents of the Volume Reducer (Step 2) to a plastic, ceramic or glass container. Divide the hair into four parts: from the middle of the forehead to the nape of the neck and from ear to ear. If necessary, secure with plastic fasteners to facilitate application.
16. Put on the gloves already contained in this kit.
17. Start the Volume Reducer application 1.0 cm away from the scalp.
18. With the help of a non-metallic handle brush, separate a thin lock of hair from the nape region and, holding it with your hands, quickly apply the product. It is important to always observe the direction of birth of the threads, applying the product along the length and preventing them from bending, facilitating breakage. Repeat the above procedure for the entire length of hair, from root to tip, lock by lock.

ATTENTION: For a satisfactory effect, it is important to ensure the application of the product throughout the hair, so align the strands with the aid of a comb, making the product to be spread throughout the hair.

19. Allow the Volume Reducer to act for 15 minutes. Do not exceed this time. Do not rinse.
20. Dry your hair with the aid of a hair dryer, carrying out the brushing process. Start this process from the strands of the nape of the neck until all the hair is brushed.
21. Then, with the aid of a flat iron heated to 200 ºC (recommended temperature) plan strand by strand 6 to 10 times each (always work with thin strands always keeping the divisions and positions according to the cut and/or desired fit). Start with the locks at the back of your neck. This process is fundamental for the realignment of the wires.
22. Wait at least 15 minutes for hair to cool down.

STEP 6 - RINSING
23. Rinse all hair with plenty of warm water. Remove the Volume Reducer with your hands, massaging the hair and scalp for total removal of the product. Rinse the back of the neck and temples very well, which we intuitively protect from getting into the eyes.

ATTENTION: The rinse is essential for removing the product, thus avoiding the permanence of residues on the scalp.

STEP 7 - RECONSTRUCTION AND FINALIZATION

24. Apply the Hair Rebuilder (Step 3) along the entire length of the hair, massaging gently.
25. FOR ALL HAIR TYPES AND BLONDE VERSIONS: Leave the Rebuilder to act for 3 minutes and rinse with plenty of water until all the product is removed from the hair. FOR BROWN VERSION: Let the Reconstructor act for 10 minutes and rinse with plenty of water until all the product is removed from the hair.
26. Remove excess water from the hair with the help of a towel.
27. Comb your hair and, using a blow dryer, direct the air jet downwards and dry the hair by sliding your fingers along the length to the ends. If desired, use a brush to shape the ends.

PRECAUTIONS AND RECOMMENDATIONS FOR USE:
IMPORTANT: The wick test must be carried out even in reapplications of the
• We do not recommend the use in pregnant women, children or adolescents under 15 years.
• Do not let the product remain on your head longer than indicated in the use mode.
• Should not be applied if there are sores, abrasions or irritations on the scalp.
• Wear the gloves contained in the package.
• Avoid contact of the product with eyes.
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• This product must not be used on mucous membranes or nearby areas.
• This product must only be used for its intended purpose, being DANGEROUS for any other use.
• For external use only. Do not ingest. Keep out of reach of children and pets, in a dry, cool place, away from heat and strong light.

FREQUENT QUESTIONS
• Can I use the SFERA PROFESSIONAL PROGRESSIVE BRUSH if my hair is fragile, dry or dull (no shine)?
No. We recommend the use of the SFERA PROFESSIONAL RECONSTRUCTION AND STRENGTH LINE or the SFERA PROFESSIONAL REPAIRING AMPOULE to restore hair until it is healthy.

• What is healthy hair?
It is hair treated weekly through the use of moisturizing products, and therefore does not show hair loss or breakage. If, after the lock test, your hair became brittle, dry or without elasticity, it is a sign that the hair is not in a healthy condition. To restore your hair, we recommend the use of the BALANCE PROFESSIONAL RECONSTRUCTION E
STRENGTH or from the SFERA PROFESSIONAL REPAIRING AMPOULE.

• How long does the SFERA PROFESSIONAL PROGRESSIVE BRUSH result last?
Durability is temporary and may vary depending on the type of hair and how often the hair is washed. On average it can last about 2 months.

• Can I color (dye) my hair after applying the SFERA PROFESSIONAL PROGRESSIVE BRUSH?
No. We recommend that you wait 15 days to use coloring/dyeing. In the case of colorants, use is permitted.

• Can I apply the SFERA PROFESSIONAL PROGRESSIVE BRUSH on colored (dyed) hair?
Yes, as long as the hair is in healthy condition. However, the hair may lose up to 2 shades of color.

• Can I apply the PROGRESSIVE SFERA PROFESSIONAL BRUSH on bleached, streaked or ballayage hair?
Yes, as long as the hair is in healthy condition. However, the strands may change color during brush application.

• Can I apply a smoothing or relaxing cream after using the SFERA PROFESSIONAL PROGRESSIVE BRUSH? How long after?
The smoothing or relaxing cream can be applied at least 30 days after using the PROGRESSIVE SFERA PROFESSIONAL BRUSH; however, the use of the product will depend on the result obtained in the mecha test.

• Can the SFERA PROFESSIONAL PROGRESSIVE BRUSH be applied to children?
No. We recommend the use of the PROGRESSIVE SFERA PROFESSIONAL BRUSH in adolescents over 15 years old.

• Can I use anti-residue or deep-cleaning shampoo after applying the SFERA PROFESSIONAL PROGRESSIVE BRUSH?
We do not recommend its use, as this type of product can help reduce the durability of the smooth effect of the SFERA PROFESSIONAL PROGRESSIVE BRUSH.

INTENSIVE CARE TIPS
Always make weekly or fortnightly moisturizers to keep your hair healthy.
For this case, we recommend the PROFESSIONAL POST-BRUSH PROFESSIONAL LINE OR THE PROFESSIONAL SFERA REPAIRING AMPOULE.
• When washing your hair, we suggest that you remove excess moisture or dry the hair completely with the aid of a dryer with the air jet directed downwards, dry the strands by sliding your fingers from top to bottom for a better alignment of the strands.
• To prolong the smooth effect of your progressive brush and keep your hair healthy, use the Sfera Professional Progressive Brush Treatment line.

Contains:
-01 Nazca Deep Cleansing Shampoo 200ml
-01 Nazca Volume Reducer 500ml
-01 Nazca Hair Reconstructor 200ml